Neles´ valve expertise secures Naantali power plant’s reliability
CHAPTER ONE New seaside multi-fuel power plant
TSE’s new seaside multi-fuel power plant in Naantali produces district heat and electricity for private customers and process steam for business customers in the Turku economic region. Commissioned in December 2017, the power plant is a prominent landmark for Naantali residents, so the exterior design of the plant also was a point of particular interest during the design phase.
Neles was chosen as the main supplier of the power plant’s control and automation valves used in the power plant’s condensate, water and steam processes.
CHAPTER TWO A design based on efficiency and high availability
“The previous plant had already accumulated over 300,000 operating hours, so it was clear that it had to be replaced with new capacity and a new plant would have to be built.” Flexibility and availability are important in power plant operations. “There must be flexibility in terms of the fuel selection and in terms of the plant’s operation and load fluctuation. We were also seeking very high availability for the plant,” Tapani Bastman, CEO of Turun Seudun Energiantuotanto Oy, describes the targets of the plant’s operations.
CHAPTER THREE Valves secure plant reliability
The power plant process involves high pressures and temperatures, and the plant must remain on stream continuously. Control valves control temperature and pressure and thus keep the power plant’s process status correct and the plant operating efficiently. “Valves are just one part of the plant totality, but if there were a problem with the valves the entire plant would come to a standstill,” Heikki Jaakkola, Project Manager in the NA4 CHP project, explains the choice of the valve supplier.
Neles’ valve selection for power plants covers all process phases. The control and automation valves for the Naantali plant were a comprehensive delivery covering all critical power plant processes. The comprehensive delivery includes valves for low-pressure and high-pressure processes.
See the video about Naantali plant
CHAPTER FOUR Environmentally pleasing, both visually and in terms of emissions
In 2018 TSE’s carbon dioxide emissions from energy production decreased by 420,000 tons per year. The longer-term strategic target is to pursue carbon-neutrality. Since 2019, the plant uses biofuel as the main fuel.
“We constantly monitor the plant’s emissions, the most critical of which are dust, sulfur and nitrogen. The plant’s CO2 emissions are monitored on an annual level, and they will decrease when we transition to the use of biofuel. In addition, we are participating in the regional air quality monitoring program, which is measuring the air quality more comprehensively. The program also covers emissions from traffic and industry and long-range transport of air-borne pollutants,” says Bastman.
Tapani Bastman is proud of the efficient, eco-friendly power plant and its stylish design. “The power plant facade was a great success; I’m pleased with the architect’s work. The good color selections contribute to the plant’s very pleasing look. The plant is highly visible in Naantali and has a big impact on Naantali residents. During the winter season, the plant also has attractive exterior lighting.”
FACTS Naantali power plant
- The multi-fuel power plant annually produces 1,400 gigawatt hours of district heat, 200 gigawatt hours of process steam, and 800 gigawatt hours of electricity.
- Commissioned in December 2017, the power plant partially replaces Naantali’s approximately 50-year-old coal-fired power plant.
- The plant is owned by Turun Seudun Energiantuotanto Oy. TSE’s main stakeholders are Turku Energia, Fortum Power and Heat, and the cities of Raisio, Kaarina and Naantali.
- Customers: Fortum, Turku Energia, Naantali, Kaarina and Raisio.
- Employees: 75
- Energy sources: biomass from forests, thinning logs, chipped poles and stumps, industrial by-products, such as bark and sawdust, straw, coal.
Neles’ delivery to the power plant
- Neles control and automation valve technology: ball, butterfly, and globe valves
- Neles globe valve technology is emphasized in critical power plant processes involving high pressures and temperatures
- Neles ND9000 valve controllers
- Neles Q-Trim noise attenuating technology